177313-02-01 Bently Nevada TK‑3E Test Kit

• Brand
  Bently Nevada
• Model
  177313-02-01
• Product Name
  TK‑3E Electric‑Driven Proximity System Test Kit
• Place of Origin
  United States
• HS Code
  9031809090
• Dimensions
  195 mm × 299 mm × 248 mm
• Weight
  8.0 kg
• Operating Temperature
  0 °C ~ +54 °C
• Storage Temperature
  -18 °C ~ +65 °C
• Power Supply
  24VDC
• Warranty
  12 month
• Product Status
  NEW BRAND

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

AC Power Input: Supports dual-range mains AC power supply, covering 95-125 VAC and 190-250 VAC at 50-60 Hz frequency. A minimum input current of 1 A is required to sustain normal operation of the internal wobble-plate drive motor during mechanical excitation.

Internal Drive Output: Delivers motor-powered drive signal to the wobble-plate assembly. It produces tunable mechanical vibration displacement within 50 μm to 254 μm peak-to-peak, alongside adjustable rotational speed ranging from 0 to 10000 CPM, so as to simulate actual rotating-shaft movement for proximity transducer system verification and calibration.

Probe Mechanical Interface Input: Equipped with a physical probe mounting receptacle compatible with proximity probes of 5 mm to 19 mm diameters. It captures probe displacement information purely via mechanical motion of the rotating target; no electrical signal input terminals are provided for direct field-sensor wiring.

Measurement Monitoring Output: This test kit contains no native electrical measurement output ports. An external multimeter must be connected to the proximity transducer system under test, to acquire DC gap voltage and vibration-related AC voltage values induced by the unit’s mechanical excitation.

Ground Interface: Features a dedicated protective earth terminal for safety-critical chassis bonding. Proper grounding minimizes electromagnetic noise interference and enhances measurement stability throughout field calibration and bench-test procedures.

New-system Commissioning & Site Acceptance Test

This test kit supports static gap calibration and dynamic vibration simulation for newly deployed proximity transducer systems, covering the full signal chain of proximity probes, proximitor modules, and Bently Nevada 3300/3500 series monitoring racks. It verifies the measurement linearity, sensing sensitivity and alarm trip threshold accuracy of machinery protection systems before rotating equipment startup. All calibration and test results ensure the complete monitoring system fully complies with API 670 industry standards, meeting formal plant commissioning and handover requirements.

Routine Preventive Maintenance for Rotating Machinery

It is applied to periodic performance verification of shaft vibration and axial displacement monitoring loops in power, petrochemical and metallurgical industries. The applicable equipment includes steam turbines, centrifugal compressors, generators, large industrial fans and process pumps. The device enables off-line testing without running mechanical equipment, effectively identifying potential faults such as sensor performance drift, field cable aging and monitoring channel deviation, ensuring long-term stable operation of machinery monitoring systems.

On-site Troubleshooting for Machinery Monitoring System

The TK-3E test kit serves as an efficient on-site troubleshooting tool for abnormal monitoring conditions including false vibration alarms, inaccurate displacement readings and unstable system indications. By outputting controllable and standard mechanical vibration excitation, it accurately differentiates fault sources such as damaged probes, faulty proximitor modules, field cable electromagnetic interference and monitoring rack channel failures. It effectively avoids unnecessary equipment shutdowns caused by inaccurate monitoring signal feedback.

Overhaul & Refurbishment Verification

After equipment turnaround, instrument replacement and system overhaul, the test kit is used for recalibrating proximity measurement loops. It comprehensively verifies the integrity and measurement accuracy of the entire signal chain consisting of probes, transmission cables, proximitors and monitoring modules after hardware replacement, cable rerouting and module swapping. It provides standardized and repeatable test data to support overhaul quality evaluation and system re-acceptance.

Workshop Bench-test for Spare Instrument Parts

It is widely used for incoming inspection and pre-commissioning bench tests of spare proximity probes and proximitor modules in instrument maintenance workshops. The performance of standby instruments is fully verified before on-site installation and deployment, which eliminates hidden troubles of defective spare parts, reduces on-site commissioning failures and minimizes unplanned production downtime.

Training & Technical Assessment for Instrument Technicians

The device provides standardized static displacement and dynamic vibration simulation conditions for professional technical training of instrument maintenance personnel. It helps technicians proficiently master the calibration specifications, probe gap setting methods and system fault diagnosis logic of rotating machinery protection transducers, improving on-site operation and troubleshooting capabilities.

Quality Verification After Sensor Repair

After the maintenance and reconditioning of faulty proximity sensors and transducer modules, the TK-3E test kit is used for overall performance verification. By comparing the actual system output response with factory standard parameters, it confirms that the repaired instruments meet industrial field operation and precision measurement requirements, realizing closed-loop quality inspection of equipment maintenance.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms