DS200TCQCG1BHF GE Turbine Control Module

• Brand
  GE
• Model
  DS200TCQCG1BHF
• Product Name
  Mark V Speedtronic Turbine Control Module
• Place of Origin
  United States
• HS Code
  8542319000
• Dimensions
  150mm × 100mm × 50mm
• Weight
  1.0kg
• Operating Temperature
  -20°C ~ +65°C
• Storage Temperature
  -40°C ~ +70°C
• Power Supply
  DC 24V
• Warranty
  12 MONTH
• Product Status
  New and original

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

Input

LVDT differential position input: AC weak millivolt differential signal, valve displacement feedback access, with on-board hardware demodulation filtering;

4–20mA analog current input: pressure, flow, vibration field sensor signal acquisition;

Thermocouple millivolt input: range -10mV~+70mV, compatible with J/K/B/E/N/R/S/T thermocouple types;

Generator electrical signal input: voltage & current sampling signal for power grid monitoring;

Backplane internal input: +5V, ±15VDC logic power, Q-Bus redundant communication signal, 24VDC auxiliary power supply.

Output

LVDT AC excitation output: dedicated drive power for displacement sensors;

4–20mA analog control output: servo valve, fuel actuator position drive signal;

Analog voltage output: ±10V regulating signal for auxiliary control equipment;

Internal bus output: processed digital signal transmitted to triple-redundant R/S/T main control boards;

Relay interlock output: dry contact switching signal for turbine safety overflow fault reset & alarm linkage.

System Architecture

It is an analog I/O expansion board for GE Mark V EX2000 turbine control systems, adapting to triple-redundant R/S/T processors. It supports hot standby switching within 40ms and meets IEC 61508 SIL2 safety standards.

Signal Processing

It integrates LVDT hardware demodulation with adjustable excitation frequencies (60Hz/2400Hz/4800Hz). It supports 4–20mA, ±10V signals and common thermocouples with linearization.

Each channel is optically isolated from internal circuits with 500VAC isolation for strong anti-interference capability. It delivers high-precision sampling, amplification and filtering for position, temperature, pressure and flow signals.

Hardware Configuration

It has 11 pin connectors including 3PL, JE, JF, JG, JZ for bus communication, sensor and actuator wiring.

37 jumpers enable quick onsite parameter configuration, and reserved test points facilitate debugging.

It contains 6 relay outputs, heat sinks and protective fuses; servo outputs feature short-circuit protection with a 200mA current limit.

The plug-in card draws +5V and ±15VDC power from the rack backplane without external power supply.

Environmental Performance & Reliability

Operating temperature: -40℃ ~ +75℃; storage temperature: -55℃ ~ +85℃, suitable for harsh industrial cabinet environments.

The multi-layer PCB undergoes strict aging tests, with an MTBF of 140000 hours. It is fully compatible with Mark V peripherals and easy to maintain and replace.

Communication & Application

It transmits processed field data to main controllers via real-time Q-Bus communication.

Commonly used on gas turbines, steam turbines and derived turbines in power, petrochemical and chemical industries.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms.