Kongsberg RMP200-8 603443 IO Module

• Brand
  Kongsberg
• Model
  RMP200-8 603443
• Product Name
  Remote Multi-Purpose I/O Module
• Place of Origin
  Norway
• HS Code
  85371090
• Dimensions
  142 mm × 80 mm × 30 mm
• Weight
  0.40 kg
• Operating Temperature
  -20 °C to +60 °C
• Storage Temperature
  -40 °C to +85 °C
• Power Supply
  24VDC
• Warranty
  12 month
• Product Status
  New and original

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

Module Type: Remote Multi-purpose I/O Module

Equipped with 8 universal configurable channels (Channel 1 ~ Channel 8).

The signal type and direction of each channel can be flexibly configured as digital input, digital output, analog input or analog output through system software. No hardware jumper setting is required.

Supported Input Modes

Digital Input: 24 VDC discrete signal

Analog Input: 4…20 mA, 0…20 mA, 0…10 V DC, -10…+10 V DC

Supported Output Modes

Digital Output: 24 VDC transistor type output

Analog Output: 4…20 mA, 0…20 mA, 0…10 V DC

Power Specification

Module Supply Voltage: 24 VDC

Operating voltage range: 18 VDC ~ 32 VDC

Communication Interface

Dual RBUS communication ports (MSD, LSD) are available for bus connection to establish data communication with the Kongsberg control system. Daisy-chain connection is supported.

Channel Terminal Arrangement

CH1, CH2, CH3, CH4

CH5, CH6, CH7, CH8

Additional Information

This I/O module is developed for Kongsberg K-Chief marine automation system. Each channel features galvanic isolation to suppress interference from field equipment and improve system stability against electrical noise.

Mounting Type: Standard 35 mm DIN rail mounting within control cabinets

Protection Class: IP20, suitable solely for installation inside enclosed cabinets

Mounting Procedures

Verify the DIN rail is rigidly mounted horizontally on the cabinet mounting plate. Vertical mounting is not advised.

Engage the module’s upper locking catch onto the top edge of the DIN rail.

Push the lower part of the module toward the rail until the bottom spring clip clicks into place for firm fixation.

Module removal: Pull down the bottom spring latch using a screwdriver, tilt the lower part outward, then lift the module off the DIN rail.

Installation Clearance & Ventilation

Leave adequate clearance above and beneath the module to facilitate natural heat dissipation.

Maintain reasonable gaps between neighbouring I/O modules to prevent heat buildup.

Do not obstruct ventilation openings on the module enclosure.

Wiring Requirements

Execute all wiring operations after cutting off the power supply.

Separate signal cables and power cables to minimise electromagnetic interference.

Fasten terminal screws with specified torque to avoid loose connections or broken wire strands.

Apply correct cable shielding and earthing practices in accordance with marine automation standards.

Communication Connection

Attach RBUS communication cables to MSD and LSD ports. Daisy-chain topology is supported for the K-Chief system network.

Lay communication cables apart from high-power circuits.

Environmental Installation Conditions

Mount the module inside dry, vibration-isolated cabinets that meet marine requirements for ambient temperature and humidity.

Protect the module against direct sunlight, water splashes, corrosive fumes and heavy conductive dust.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms