CP800 ABB Communication Processor Module

• Brand
  ABB
• Model
  CP800
• Product Name
  Communication Processor Module
• Place of Origin
  India
• HS Code
  8538909190
• Dimensions
  170.18 mm (Width) × 73.66 mm (Height) × 243.84 mm (Depth)
• Weight
  0.99 kg
• Operating Temperature
  0 °C ~ +65 °C
• Storage Temperature
  -40 °C ~ +85 °C
• Power Supply
  24 VDC
• Warranty
  12 month
• Product Status
  New and original

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

Power Supply Input

Nominal supply voltage: 24 V DC ±10%, powered via rack backplane

Typical power consumption: Approximately 10 W

No independent external power terminals for field wiring.

Backplane Bus Interface

The internal backplane connector serves as a bidirectional data interface, exchanging process data and control commands with the HPC800 main controller.

The CP800 module integrates no onboard field analog or digital I/O terminals. All field signal acquisition and output functions rely on matched external S800 I/O modules installed on the same rack.

External Communication Interfaces

PN800 Plant Network Ethernet (10/100 Mbps)

Dedicated internal system Ethernet port for data interaction with Symphony Plus HPC800 series controllers.

Universal Ethernet Port (10/100 Mbps)

Applied for external communication with SCADA systems, third-party devices and Modbus TCP network connections, supporting remote access.

Configurable Serial Port (RS232 / RS485)

Supports Modbus RTU and other mainstream serial field communication protocols for on-site device docking.

Backup Power Circuit

Equipped with a built-in CR2032 lithium coin cell, which provides backup power for the system real-time clock and non-volatile configuration memory during power failure. No external output terminals are available for this backup circuit.

The ABB CP800 is a high-performance dedicated communication processor tailored for the Symphony Plus HPC800 control system, serving as a bidirectional data gateway at the control rack level. Supplied with 24 V DC power through the backplane, the module supports steady operation of its internal processor and uninterrupted data communication across the system.

Built around a high-speed 32-bit embedded processor core, the CP800 undertakes centralized processing, sorting and forwarding of system data. It communicates with the HPC800 main controller over the internal backplane bus to exchange real-time control logic, process variables, alarm events and configuration parameters, enabling synchronized data transmission inside the control rack.

The module integrates diverse communication interfaces to facilitate signal interconnection and protocol conversion between the internal control system and external field devices. The proprietary PN800 plant Ethernet delivers low-latency and highly reliable transmission for internal system data. The general-purpose Ethernet port allows external connectivity with SCADA platforms, host workstations and Modbus TCP-compliant equipment. Meanwhile, the configurable RS232/RS485 serial interface supports field data communication via standard serial protocols including Modbus RTU.

The CP800 operates in coordination with ABB S800 series I/O modules and cannot collect field signals directly. It receives sampled field data transmitted from S800 modules via the backplane bus, and distributes control commands issued by the main controller to corresponding field I/O modules, establishing a closed-loop transmission path for control commands and process feedback data.

An on-board CR2032 backup battery sustains the real-time clock and preserves system configuration parameters in non-volatile memory during power failures, facilitating rapid system restart and intact parameter retention once power resumes. While online, the CP800 continuously monitors, filters and reliably routes communication traffic, safeguarding the real-time responsiveness and stable operation of the overall automation control system.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms